Blue Robotics BlueRov2 Enclosure Only

Regular price $2,940.00

Pre-wired and tested with all of the BlueROV2 electronics, this enclosure is ready-to-integrate into your custom ROV frame or other application.

This includes the 18-hole end cap with nothing installed. At minimum, we recommend including a Pressure Relief Valve or M10 Enclosure Vent and Plug, a pressure sensor like the Bar30 High-Resolution 300m Depth/Pressure Sensor and the Power Cable Set to connect to a battery enclosure.

Rated to 100 m (330 ft) with an acrylic tube, or 300 m (985 ft) with an aluminum tube, this is an excellent option if you are building a custom ROV frame and need a ready to use electronics and control solution!

Contents

4″ Series Enclosure

  • 1 x 4″ Series Tube – 11.8″, 300mm (as configured)
  • 2 x 4″ Series O-Ring Flange
  • 1 x 4″ Series Dome End Cap
  • 1 x 4″ Series Aluminum 18-Hole End Cap

Advanced Electronics

  • 1 x Raspberry Pi 4 Model B Computer
  • 1 x Navigator Flight Controller
  • 1 x Low-Light HD USB Camera
  • 1 x Single Fathom-X Tether Interface Board
  • 1 x BlueOS Raspbian microSD Card (16GB)
  • 1 x 5V 6A Power Supply
  • 1 x Blue Robotics Power Sense Module
  • 6 x Basic ESC

Electronics Tray

  • 1 x 4″ Series Electronics Tray (with Terminal Blocks and Hardware)
  • 1 x Camera Tilt System (with Mount for USB Camera)